INSTALLATION OF FORTADOR KEVLAR CERAMIC COATING
Step 1: Installation of Kevlar Ceramic Coating Primer
Before you start the installation of Fortador Kevlar you have to prepare your vehicle. In order to get the best car’s look and protection, you need to wash the car, polish it, make the paint correction to remove all of the imperfections like scratches and other marks, do the steam cleaning to remove residues, and polish the car paint with a microfiber cloth. When your vehicle is clear and prepared, you can start the application. Use the primer/activator with the applicator pad (5–15 drops will be okay) and rub it in the car’s or truck’s body. Wait 5 minutes. After this, the primer and the bond will evaporate, and then you can go to the next step.
Step 2: Installation of Kevlar Ceramic Coating Paste
That is the proper stage of installation of Kevlar coating. Follow the safety instructions and apply a thin layer of paste from the jar. Let it completely dry for 5–10 minutes. Afterward, polish it by hand with the microfiber cloth and after the next 15 minutes repeat this action with the same towel. You can enjoy the final result of your work.
Step 3: Installation of Kevlar Spray Ceramic Coating for Interior
To make your job completed, apply Kevlar Coating inside the car – on the car seats, leather, upholstery, dashboard, and carpets. But first, you have to vacuum and clean the interior precisely. Spray the product on the dry materials from one foot away. You don’t need to rub it, you should only wait about 15 minutes to make sure that preparation is dry. Then apply the second layer and wait again. You’re done! You can go for a ride and enjoy your brand new, clear, and protected car.